Creating and Commercializing the NIST RoboCrane

Nicholas G. Dagalakis, Mechanical Engineer, National Institute of Standards and Technology (NIST)

The RoboCrane — now hard at work at the Chernobyl and Fukushima nuclear cleanup sites — is a good example of a successfully commercialized technology invented at the National Institute of Standards and Technology (NIST). I’ll try to tell that story in this blog.

In the early 1980s, the manufacturing of industrial robots was dominated by a few dozen U.S. companies eager to expand into new applications with new innovative robot designs. One application that had not yet been explored was that of robotic cranes that could move and position industrial robots or tools in novel ways to achieve a variety of new tasks. The main reason was that single-point suspended cranes have very low resistance to swing and low resistance to twist about a vertical vector axis. This is a serious limitation because most industrial robots require a stable base for their operation. Some manufacturers resorted to the use of rigid telescoping masts, which are heavy and have limited reach and payload capability. To address this problem in the mid-1980s, the late James Albus, a prolific visionary and longtime chief of my division, invented what was later called the NIST RoboCrane.

The RoboCrane is a system of six cables suspending a platform by three points, giving the platform the motion capabilities of the human forearm and wrist. I worked out the mathematical models that would supply the correct amount of tension to the cables to hold the platform steadily in place and move it around its six degrees of freedom (rotation and translation about its various axes). Industrial robots or tools, such as those that grab, saw, hammer or weld, can be mounted to the RoboCrane moving platform where they act like fingers, with each interchangeable robot “digit” capable of performing different tasks in otherwise difficult or dangerous-to-reach places, such as airplane fuselage inspection and painting, and nuclear power plant fuel rod installation and removal.

The staff in my division built a functioning experimental prototype of a freestanding RoboCrane sometime around 1990. We called it the Spider because of its shape. An interesting feature of the Spider crane was that its supporting legs could be folded inward, so the whole crane formed a flat package for easy transport and reassembly. I developed a sophisticated controller for this prototype, which made possible the demonstration of several manufacturing capabilities of the Spider. We showed tools mounted to the Spider moving platform being used to weld steel beams, grind or saw large steel or wood beams, mount large steel I-beams, fit pipes, and grab and manipulate large barrels.

Collaboration with a metal bridge manufacturer demonstrated that the Spider could successfully manipulate and join long, heavy bridge modules. This led to proposals for alternative designs of the RoboCrane’s wire ropes so that they could also handle long bridge segments, ship cargo containers and shipbuilding materials. The fact that the Spider version of the RoboCrane is comparably light for the weight of the payloads it can lift and its portability has led to several concept designs and proposals for space applications, such as building habitats on other planets (such as Mars) and satellites (such as the Moon), collections of soil samples, and more.

The technology transfer breakthrough came in the late 1990s during my participation in a Robotic Industries Association committee for writing industrial robot safety standards. During one of the committee meetings, I gave an informal presentation of our RoboCrane technology work and its potential as an industrial tool with a large variety of applications. One member of this committee was a representative of PaR Systems Inc., of the Greater Minneapolis-St. Paul area. He expressed his interest in this technology, and I invited him to the NIST RoboCrane lab to see our functioning model of the Spider. I demonstrated to him my controller and a variety of applications that I had programmed for the RoboCrane controller.

A while later we arranged to bring a group of his technical people to see the RoboCrane demos. Soon after this meeting they invited me to visit their plant in Minnesota to give a talk to the whole technical staff regarding the RoboCrane technology and my controller. In the early 2000s, I learned that PaR Systems had signed a cooperative agreement with NIST for the transfer of the RoboCrane technology to them. Later they told me that they had built a functioning prototype of the RoboCrane, which they called TensileTruss, and that it was working well.

Unexpected Applications

In April 1986, the Chernobyl nuclear power plant exploded and began showering the surrounding area and most of Europe with radioactive debris. The Soviet government was able to contain the disaster with a giant concrete and steel sarcophagus, but after the break-up of the Soviet Union in 1991, Ukraine, where Chernobyl is located, inherited the nuclear contamination problem. Ukraine could do very little to remediate the disaster site because of lack of funds. In 1997, the G7 countries, the European Commission and Ukraine began to raise the estimated 2.1 billion euros (approximately $3.6 billion now) necessary to fund a program to cover the Chernobyl disaster site with a secure containment structure and do cleanup. That structure was to last 100 years, and within that period workers would dismantle the remnants of the nuclear reactor and securely bury the toxic parts.

I learned that they were looking for special cranes that could accomplish the dismantling operation and survive 100 years of extremely high levels of nuclear radiation. Later I learned that PaR would be constructing three of their cranes designed to dismantle the damaged nuclear reactor. These cranes can be seen in the last segment of a Discovery Channel documentary called Impossible Engineering: Chernobyl’s Toughest Fix. That was a very gratifying experience for me.

I ran into my associate from PaR Systems at a meeting at NIST in 2013, and he told me their system was being considered for the decommissioning operations and spent fuel recovery at the Fukushima Daiichi Nuclear Power Plant in Japan, where four nuclear reactors were heavily damaged by a 2011 earthquake and tsunami. This system will deploy interchangeable tools such as underwater hydraulic manipulators, hydraulic shears and crushers, grippers, and fuel grapples. This system is described in World Nuclear News (Jan. 18, 2016), which shows the crane fitted with a remotely operated system supplied by Toshiba, equipped with tools necessary for the removal of the debris and fuel assemblies of the destroyed plant. The World Nuclear News (March 1, 2021) also reported that the removal of unit 3 of the Fukushima Daiichi storage fuel pools was completed in March 2021. The experience gained from that operation will be used for the fuel removal from units 1 and 2. What an interesting journey for the RoboCrane, from our 1980s NIST laboratory to a 2021 Japanese nuclear power plant disaster site!

* The author would like to thank the following (past and present) NIST researchers who contributed to the success of the RoboCrane: Roger Bostelman, Adam Jacoff, Kamel Saidi, Bob Bunch, Bob Russell, Fred Proctor, Will Shackleford, Chuck Giauque, Ann Virts, Ed Amatucci, Tom Wheatley and Rick Norcross, as well as several students and other contributors.

This post originally appeared on Taking Measure, the official blog of the National Institute of Standards and Technology (NIST) on November 3, 2021.

To make sure you never miss our blog posts or other news from NIST, sign up for our email alerts.

About the Author

Nicholas G. Dagalakis has undergraduate university degrees in mechanical and electrical engineering and three graduate degrees from the Massachusetts Institute of Technology.

He has worked for two small private companies and two universities.

He has several years of University teaching experience and many years of engineering research work experience in high-speed trains, superconducting generators, modal analysis, robotics and artificial skin, loss of control biomechanics, impact biomechanics and computer-assisted orthopaedic surgery.

He has conducted research for the NIST RoboCrane, now used for the clean-up of the Chernobyl and Fukushima nuclear power plants disaster sites, also on high precision micro-nano robot manipulators and positioners, now part of the NIST physical realization of the kilogram instrument displayed in the NIST museum. Currently, his research focus is on collaborative robots’ control and metrology instrumentation and for understanding the human injury mechanism inflicted by robots, using human tissue bio-simulant artifacts.




NIST promotes U.S. innovation by advancing measurement science, standards and technology in ways that enhance economic security and improve our quality of life.

Love podcasts or audiobooks? Learn on the go with our new app.

Recommended from Medium

Our research. Our patients. Our responsibility.

Aerodynamics of our Campus: The Venturi Effect

NIST’s Investigations of Structural Disasters: What We Do and Why They Can Take Years to Complete

Wisdom from Woody

Face Values: Sci-Fi Series-Index

Malaria in Africa: Researchers Turn to a Plant, to Save 500,000 Dying Yearly

How Do Nuclear Weapons Actually Work?

How do you Create a Boson?

Get the Medium app

A button that says 'Download on the App Store', and if clicked it will lead you to the iOS App store
A button that says 'Get it on, Google Play', and if clicked it will lead you to the Google Play store
National Institute of Standards and Technology

National Institute of Standards and Technology

NIST promotes U.S. innovation by advancing measurement science, standards and technology in ways that enhance economic security and improve our quality of life.

More from Medium

Steps involved in Data push and Data extraction in Workday

Evolving in photography: from Canon EOS to a smartphone

Mexican Gothic — A Horrific Treat

A brief note on wind and hot air